To start off, the preparation of fitting a Wheel Finesse Steering Wheel Covers is essential and quite frankly, it’s the most important stage. Make sure you have aligned the cover perfectly and everything lines up. Once that’s done secure the Left Side, Right Side, and the Bottom, Front & Back with sticky tape. This will prevent the cover feeling loose and moving. Tuck the cover before stitching. Use the tucking tool we have provided you with. You do not need to remove anything from the steering wheel to fit these Covers, However, you can do this if you are confident as it will make things easier with fitting and you will get that more desired look, but don’t stress it is not mandatory. Once the Cover’s preparation is perfect it’s time to get this fitted!